With the development of science and technology, nowadays, for the processing of peanuts, it is no longer the traditional manual peeling. It is the use of peanut peeling , which greatly improves the work efficiency. So what do we need to meet when using a peanut stone machine?
1 winter shelling, use peanut stone machine to remove the shell evenly sprayed with 50kg of warm water on 50kg of peeled fruit, and covered with plastic film for about 10 hours, then cool in the sun for about 1 hour to start shelling. In other seasons, the time covered with plastic film is about 6 hours, and the rest is the same.
2 Dilute the dried peanuts in a large pool, immediately remove them and cover them with plastic film for about 1 day, then cool them in the sun. After drying and drying, start to peel off with peanut peeling machine.
3 Connect the 380 volt three-phase power supply before use, then start the motor to see if the running direction is consistent with the direction of the indicating arrow. If it is inconsistent, adjust any two connectors in the power supply to achieve the same direction as the indicating arrow.
4 peanuts should not be too dry, otherwise it is brittle, the water content should be kept at about 9%, otherwise the breaking rate will increase. In this case, it is best to use water tide first, and wait for 4 hours in winter to produce.
5 Before the production of the feed, it is best to separate the peanuts to be shelled, separate the peanuts with different varieties and sizes, and then determine the use of sieves of appropriate specifications, which can greatly improve production efficiency and reduce the breakage rate.
Since the casting of the peanut stone removal machine replaces the traditional processing method, for the stone removal machine, it is necessary to do the above work before the start of the machine to operate safely. After the test run, if all parts of the machine are operating normally and there is no abnormal sound, the production can be started.
